From The RadioReference Wiki

• Tk503 2ftk504 Programming Cable Driver Download For Windows 10 64-bit
• Tk503/tk504 Programming Cable Driver Download For Windows 10 Free
• Tk503/tk504 Programming Cable Driver Download For Windows 10 2 0

With the lack of serial ports on newer PCs these days, having to connect to a USB port is a necessary, but sometimes frustrating, evil. The listings below detail which USB cable to buy, and other important conditions.

For example, to use an Intel download cable or programming unit to program devices with the Intel Quartus ® Prime software, you must first set up the correct driver. Note: Some cable drivers are not available for download on this page. They are available after you install the Intel Quartus Prime software in the. Sep 04, 2019 To install the drivers, you will need to follow the steps below. Step 1: Connect the platform cable. Now go to device manager in Windows, right click on “Platform USB” and select “Uninstall”. Step 2: When the uninstall window pops up, check the box that says “Delete the driver software for this device.”.

• 3Uniden Scanners
• 7Installation Notes
  • 7.4Windows 8 Issues and Solutions

GRE Scanners

• The PSR-500 and PSR-600 both came with their own USB cable
• These scanners are able to use the Whistler cables.
• If you are using the older GRE cable, the PC/IF 30-290 Data Cable Driver can be found at the GRE America website

Radio Shack Scanners

• RS USB cable SKUs
  • 20-047 Legacy
  • 20-546 Legacy
  • Catalog #: 2000546 as of 2019
• The Whistler cable - SKU: PCIF02 is known to work with many of the RS scanners including the Pro-106, Pro-651, Pro-652 and Pro-197

Pigtail Usage Cross Reference Table

Notes

1. The original version of the PRO-92 requires the pigtail- the A and B models don't
2. The PRO-94 came out with a B version years ago which is the only one that is PC addressable (up/download data only)
3. The PRO-2052 is a Uniden product with a DB9 connector in the back. See the Uniden section below for more information
4. Unlike their GRE and Whistler brothers, the Pro-106 and Pro-197 do not come with the USB cable; you must buy it separately

Uniden Scanners

Drivers

• USB Drivers for the BCD325P2 / BCD996P2 Standard USB Mini-B connection cable can be found below;

• Uniden USB-1 cable (for other Uniden Scanners)
  • From Scanner Master
    • Certified to work with the BC95XLT and the DMA Scanners (includes XT versions)
  • The latest Uniden USB-1 drivers, install Driver prior to cable installation
    • NOTE: Uniden handhelds often include a Serial programming cable - DB9 to DB9 with null modem adapter (DB9 thru cables wont work), or DB9 to a proprietary small 4 Pin Serial Connection (Hirose MQ172-4 Series Miniature jack-Uniden unique signaling) a USB to RS-232 converter may be required to interface with PCs that lack true serial ports.

Whistler Products

• Whistler USB Cable for WS-1010 and WS-1025
  • This cable works with the WS1040 and WS1065

Aftermarket Cables for GRE / RS / Whistler Scanners

• Valley Enterprises FTDI chipset USB cable (direct)
• Valley Enterprises FTDI chipset USB cable (via eBay)

Generic USB to RS-232 serial converters

If the programming cable for your radio requires an Serial interface (DB9 female) and your computer only has USB ports, you will need to utilize a USB to Serial (DB9 male) Converter. They are available from various retailers. Cables which use the FTDI chip or authentic Prolific PL2303 chipsets work the most reliably.

Uniden's USB-1 cable, as well as cables provided by GRE and RadioShack use only authentic chipsets, and are more likely to include continued forward support.

• Note: some very inexpensive converter cables (<$10) are available, but many use counterfeit chipsets; Prolific has made their 2013+ drivers incompatible with inauthentic chips.
  
• Note: older Uniden USB-1 cables may not be able to work with newest driver and an older driver may be need pre-2012 click here for older driver.

Driver websites

• Prolific Drivers

From the CHIRP Wiki

USB/Serial Devices

• Digi-Key - 768-1013-ND (Manufacturer - US232R-10-BLK) - FTDI USB to RS232 cables
• Monoprice model 2276
  • It is being discussed, along with driver issues, here

Installation Notes

Accessing Device Manager

Unfortunately sometimes ports aren't available when you think they are, or everything appears to have installed correctly, but still doesn't seem to work. The tool that will allow you to diagnose these issues is Device Manager. You can access this tool in several ways, depending on the OS:

• XP: Start>Control Panel>System>Hardware>Click on the Device Manager button.
• Vista: Control Panel>System and Maintenance>Device Manager
• Win7: Control Panel>System and Security>System>Device Manager
• Click on Start in the Taskbar then Run and enter devmgmt.msc in the resulting box
• Press the Windows key+R, in the resulting menu type 'devmgmt.msc'
• Click Start --> Right click on My Computer and select Properties, click the Device Manager link on the left.
• Press the Windows key + pause/break key
• Set up a .bat file with the following using Notepad or Wordpad. When you want to run this, right click on it, select Run as Administrator (Vista, Win7)

Checklist and Procedures

• CAUTION: There have been numerous reports of drivers for devices that are not compatible with (or do not supply a driver for) Windows 7 64 bit. Make sure your device has a driver that is compatible before proceeding

1. Use Device Manager to determine if other COM ports are available, and not held by Bluetooth or other devices. Sometimes such devices will hold an address even if it's not actually in use (Figure 1).
2. Download the most up to date drivers from the manufacturer or distributor and install. Figure 2 shows one possible result. At this point you need to validate if your application can actually address the COM port that has been assigned. If it can't...

1. In the 'Ports (COM & LPT)' section of Device Manager you should see an entry that reads something like 'Serial on USB Port (COM 15)'. The actual text will vary with the driver's documentation
2. Select the Serial Device Entry in the list
3. Right click on it and select Properties
4. Select the Port Settings tab and click on the Advanced button. Change the COM port address.
5. Also in the Advanced menu, make sure the speed on the com port matches the speed the scanner is expecting, and also matches whatever the software is expecting

Uniden Scanner Port Settings

Scanner Setting to engage an open com port, some models require the GPS Port to be turned on inside the scanner, some use the term PC CONTROL, or SERIAL PORT, some automatically connect with proper USB driver for the scanner, most user connect and never have a problem some take the necessary step to save all drivers use and working and it's suggested to do just that. Sometimes a scanner will register as 'not connected' until this procedure is completed. It's beyond the scope of this article to detail this, as it tends to vary from scanner to scanner. For the Uniden DMA driven scanners, see the Freescan - Connecting Scanner to PC article which has a summary (from the Easier to Read manuals) of the MENU commands necessary to set up the speeds for the port(s). For all others, look in the scanner's manual for the keystrokes needed to put the scanner in 'RMT' REMOTE (or similar) mode.

• Note: Common transfer modes tend to work are: 9600bps, 57,600bps and 115,200bps Note, some devices don't like to be completely erased at its' highest transfer rate, safer erasing is believed to best done at a mid to slow rate.
  • For GPS users return the port speed to its correct setting.

Windows 8 Issues and Solutions

Cables Known to be Compatible with Win 8.x

Websites With Win 8.x Information

• If you are using the Uniden USB-1 and your drivers don't seem to work,
  • If you have the HXA chipset, the driver must be rolled back to version 3.4.25.218, 10/7/2011.
  • These drivers can be found here;

RadioReference Forum Threads on USB Issues

Windows 10 Discussions

Software Setup for Linux

Unlike Windows Linux doesn't require drivers even for RS-232 to [USB adapters] 'It just works'. Several Windows applications will also run on Linux with the use of Wine.

Related Links

(DO NOT connect cable to your computer yet. Only do this when you're instructed below.)

Start by downloading the VAG-COM Driver Pack 1.

Here's how to install on different Windows versions...

Windows Vista, 7, 8, 8.1, 10:

Uncompress the file. Double-click on 'Install.exe' to install the drivers. When complete — plug in cable into any USB port on your computer and wait for automatic installation to complete.

If install is successful, move onto Step 2.

If installation fails, see below: Troubleshooting: If Drivers Failed To Install

Windows XP:

1. Uncompress the file. Double-click on 'Install.exe' to install the drivers.
2. Plug cable into any computer's USB port.
3. 'Found New Hardware Wizard' will start and it will ask you 'Can Windows connect to Windows Update to search for the software?'. Select 'Yes'.
4. Select 'Install the software automatically'.
5. After the installation is complete, click 'Finish'.
6. 'Found New Hardware Wizard' will start once again because there are two drivers for this cable.
7. Go through the same steps as explained above to install this second driver.

If install is successful, move onto Step 2.

If installation fails, see below: Troubleshooting: If Drivers Failed To Install

Troubleshooting: If Drivers Failed To Install:

Installation failed? Download here VAG-COM Driver Pack 2.

Unextract the file into any folder. Then while your cable is connected to the computer — go Device Manager.

• Windows Vista/7/8/10: Control Panel » System » Device Manager
• Windows XP: Control Panel » System » 'Hardware' tab » Device Manager

You'll see a device similar to 'USB Serial Port' under either 'Other devices' or 'Ports (COM & LPT)'.

Right-click and choose 'Update Driver Software'. Like this:

Tk503 2ftk504 Programming Cable Driver Download For Windows 10 64-bit

Then select the location where you unextracted Driver Pack 2. Let it install.

Go to Control Panel.

• Windows Vista/7/8/10: Control Panel » System » Device Manager
• Windows XP: Control Panel » System » 'Hardware' tab » Device Manager

Expand 'Other devices' or 'Ports (COM & LPT)'. Whichever contains 'USB Serial Port'.

Next to 'USB Serial Port' — you'll see a number.

If the COM port number is between 1-4, then everything is fine. Move onto Step 3.

If the COM port number is above 4, then we'll have to change it so it's between 1-4. Here's how...

Cable should be plugged into computer.

1. Start VCDS-Lite software.
2. Click 'Options' button.
3. You will see 'Select COM Port' box. Select the 'COM Port' number as explained in Step 2.
4. Click the ‘Test’ button.
5. If everything is good, it should display 'Interface Status: Found!'.
6. You can now connect other end of cable to car. Turn on ignition. And you're ready to start diagnosing!

Tk503/tk504 Programming Cable Driver Download For Windows 10 Free

If test is not successful — check the following:

1. Other software or devices using USB ports or that same COM Port could be conflicting. You should uninstall the suspected software or device for troubleshooting this problem.
2. It should be noted that VAG-COM 409.1 KKL cable does not work on vehicles running on CAN-BUS System.
3. Cable must be plugged into the vehicle with ignition ON.
4. Test the cable with each COM Port from 1 to 4 in Windows Device Manager.
5. Make sure that the driver is installed and configured as explained in Step 1.

• Only Audi, Volkswagen, Skoda and Seat vehicles are supported. Other brands will only work for generic OBD-II functions.
• If VAG-COM 409.1 KKL cable doesn't connect — or if you get the error message 'Can't Synch Baud Rate' — then go to Options and set Start Baud to 9600. If 9600 doesn't work, try 4800 and 1200. Turn the vehicle's ignition OFF and back ON after each failed attempt to connect.
• If you have installed VCDS software before or from another source, uninstall all versions of VCDS software right now, and delete directory 'C:Ross-Tech'. Then install latest version of VCDS-Lite software by clicking here.

For further information and instructions for troubleshooting, visit the following links:

Tk503/tk504 Programming Cable Driver Download For Windows 10 2 0

How to Install & Register VCDS-Lite software That Came With Your VAG-COM 409.1 KKL Cable